Tdp-5 Single Punch Tablet Press Machine

• Customization: Available
• Certification: CE, GMP, ISO
• Warranty: 1 Year
• Model NO.: TDP-5
• Max. Press Strength(Kn): 50
• Max. Tablet Diameter(mm): 18
• Max. Filling Depth(mm): 17
• Productive Capacity(PCS/H): 4500
• Length*Width*Height(mm): 650*440*650
• Weight(Kg): 120
• Turning Speed(R/Min): 1400
• Motor Power(W): 550
• Name: Single Punch Tablet Press
• Type: Sliced Herbal Medicine Machinery
• Finished Dosage Form: Tablet
• Precision: High Precision
• Computerized: Computerized
• Customized: Customized
• Condition: New
• Voltage: Customized
• Transport Package: Wooden Case
• Specification: GMP
• Trademark: SUPM
• Origin: China
• Production Capacity: 500 Sets/Year
• Package Size: 0.65cm * 0.44cm * 0.65cm
• Package Gross Weight: 120.000kg

Product Description

Tdp-5 Single Punch Tablet Press machine

A. Application and Characteristic
TDP-5T Single Punch Tablet Press, which can press the powder material into tablet and can be widely used in pharmaceutical factory, chemical factory, hospital, R&D institution, laboratory. It is suitable for small batch production.
This machine is with good performance, strong suitability, simple operation, easily repairs, small cabbage and light. Even under the conditions or power cut, hand swing available. It is only with one set of die, the depth of filling and the thickness of tablets is adjustable.
Compare to original TDP model press machine, it is enlarged the machine intensive and engine power with bigger strength. In the meantime enlarge the filling depth, hence to expand the specification range of tablet. Therefore, this machine can meet the demand of different kinds of Chinese traditional medicine and Western medicine and other similar product's requirements. It's deeply welcome by our customers in different field.
B. Technical Parameters

No.	Item	TDP-5
1	Max. press strength(KN)	50
2	Max. tablet diameter(mm)	18
3	Max. filling depth(mm)	17
4	Productive capacity(pcs/h)	4500
5	Motor power(w)	550
6	Turning speed(r/min)	1400
7	Weight(kg)	120
8	Length*width*height(mm)	650*440*650

1. Installation and Connection

1. Tablet Press Machine should be installed on the wood workable (as well on the cement table). Use three units of M12 bolts for fixing it. The height between the workable surface and ground is around 600mm (consider easily to the operation). To be convenient to disassembled and repair, there should be a hole on the wood workable that its diameter around 35mm counter to the position of lower punch.
2. To insure the safety connecting ground wire before connecting the power, and then remove the triangle belt, connect the power of the machine and switch it on to observe the roiling direction of the operation. (The rotary direction of motor shaft should be on the same direction of the arrow of large pulley wheel). If the rotary direction is incorrect, you should connect another line, and then install the triangle belt.

1. Uses of Dies

1. Assemble the Die
(1)Assemble the lower punch
Unscrew the fixed screw of lower punch, rotate the hand wheel to make the lower punch raise to the top location and insert the lower punch to the hole (Attention the gap aim at the lower punch tighten bolt). At last screw the fixed bolt of lower punch.
(2)Assemble upper punch
Unscrew the upper punch tighten nut, insert the upper punch to the hole, and then screw the tighten nut.
 (3)Assemble the middle mold
Unscrew the fixed screw of middle mold, and put the mold into the hole of mold plate, in the meantime insert the lower punch into the hole. Push it to the bottom of the hole and then tighten the fixed screw of middle mold.
(4)Turn the hand wheel by hand, let upper punch slowly drop to the hole of middle mold, and observe whether there is collision or friction, if it happens, you can unscrew the fixed nuts (two pcs) of mold plate, adjust the fixed location of the middle mold plate, make the upper punch put into the hole of middle mold, and then screw the fixer nuts, adjust it till no collision or no collision or no friction it can be called qualified installment.
2. Adjustment of the Tablet Out
Turn the hand wheel to raise the lower punch to the top location, observe whether the surface of lower punch and middle mold are on the same level, if not, it will influence the tablet out. When this situation happens, unscrew the butterfly screw and loose gear plate, rotate the upper adjusting gear, make the surface of lower punch and middle mold on the same level, then press the plate, tighten the butterfly screw.
Next step, turn hand wheel and make the empty machine run for ten circle. If it goes well, and then you can put some material into the machine, and try to press the material into tablet, then do next adjustment.
3. Adjustment the filing depth (the adjustment for the weight of tablet)
Loose the butterfly screw and loose the gear press plate, turn left the down adjustable gear to raise the lower punch, and the filling depth will be reduce (the weight of tablet also will be reduce). On the contrary, increase the filling depth, the weight of tablet will also be increased. After adjustment, you should to install the gear plate and tight the butterfly screw.