Single-Effect External Circulation Alcohol Recovery Evaporator

• Customization: Available
• After-sales Service: Stay in Touch Anytime
• Certification: CE, GMP, ISO
• Model NO.: HB-1000
• Condition: New
• Customized: Customized
• Voltage: Customized
• Warranty: 1 year
• Name: Supm
• Application Scope: Industrial Use
• Material Science: Liquid
• Function: Evaporation Efficiency Improvement
• Finished Dosage Form: Liquid
• Precision: High Precision
• Computerized: Computerized
• Type: Evaporator
• Transport Package: Wooden Case
• Specification: 3850*1173*4256mm
• Trademark: SUPM
• Origin: China
• Production Capacity: 1000kg/H
• Package Size: 1.03cm * 0.86cm * 1.52cm
• Package Gross Weight: 800.000kg

Product Description

Single-Effect External Circulation Alcohol Recovery Evaporator

If the secondary steam generated during the evaporation of a solution in the evaporator is no longer utilized, this evaporation operation is called single effect evaporation. An evaporator that uses a single effect evaporation method is called a single effect evaporator. When the required production capacity is small, steam is cheap, materials are corrosive and require very expensive structural materials, or steam is contaminated and cannot be reused, a single effect evaporator should be used.

 

1, heater:
Heater shell: δ = 4mm / S30408, insulation cylinder δ = 2mm / S30408.
Heater tube: 139 - Φ32 × 2, L = 1100, made of S30408 seamless tube.
2. Evaporator:
Evaporator: inner cylinder δ=4mm/S30408, upper elliptical head δ=4mm/S30408, inner cone δ=4mm/S30408. Insulation cylinder δ=2mm/S30408, insulation cone δ=3mm/S30408.
3. Condenser:
Condenser shell side: cylinder δ = 3mm / S30408.
Condenser tube: 126 - Φ25 × 2, L = 1500, made of S30408 seamless tube.
4, cooler:
Cooler shell: cylinder δ = 3mm / S30408.
Cooler tube: Φ400-Φ32×2-12 laps, made of S30408 seamless tube.
5, accept the tank:
Accepting tank: cylinder δ=4mm/S30408, upper and lower elliptical head δ=4mm/S30408, material is S30408.
 

Insulation

Insulation material: perlite, insulation thickness 50mm.

Other accessories

1. Washer: It adopts 1 set of domestic Φ32/360o automatic rotary cleaning ball to ensure automatic online cleaning of any position on the inner surface of the tank, in line with GMP requirements.
2, temperature gauge: threaded connection M27 × 2, installed in the heater and evaporator under the circulation pipe, to ensure that the tank temperature is correct and reliable, with: bimetal thermometer (range: 0 ~ 150 °) the number of 1;
3, vacuum table: thread interface M20 × 1.5, vacuum gauge (range: -0.1 ~ 0Mpa), the number of 1;
4, sight glass: 2 pieces of DN100 sight glass;
5, explosion-proof mirror light: 2 sets of mirror light (weak electricity);
6, the mirror hole: DN350 mirror hole 1 set.
7. Accept the tank automatic vacuum conversion device: 1 piece of Φ25 quick-load pneumatic three-way ball valve, 1 piece of Φ38 quick-fit pneumatic ball valve, 1 piece of float ball level gauge.
8. Control box: 1 piece of explosion-proof control box, used to control automatic liquid discharge, other control needs to take care of themselves.