Flash Dryer for Sarcosine, Methyl Glycosine, Methyl-Aminoacetic Acid

• Heating Mode: Transmission
• Material Status: Powder
• Atomization: Pressure Atomization
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Flow: Cross Flow
• Heat Source: Steam and Electric Composition or Diesel Oil, Natu
• Type: Chinese Medicine Spray
• Model: LPG-150
• Water Evaporation Capacity(Kg/H): 150
• Revolution (Rpm): 15500
• Diameter of Atomizing Disc (mm): 150
• Max. Power of Electric Heater (Kw): 99
• Overall Dimensions (M): 5.4X4.5X7
• Structure: Spraying Drier
• Operational Method: Continuous
• Operation Pressure: Atmospheric Dryer
• Name: Centrifuge Spray Dryer
• Transport Package: Wooden Case
• Specification: GMP CE
• Trademark: Centrifuge Spray Dryer
• Origin: China
• Production Capacity: Water Evaporating Capacity 150kg/H

Product Description

Flash Dryer for Sarcosine, Methyl Glycosine, Methyl-Aminoacetic Acid

A new type equipment integrated drying technology with fluidizing technology.
Absorbed and analyzed the domestic & foreign advanced theroy ,documentation and equipment.
Series products developed jointly with rich experenced technicians and used successfully in chemical industry.
Be meticulous in design and manufacture in accordance with matter nature and processing conditions so as to complete turnkey project.
Main Characteristics
The equipment is integrated with crushing ,drying and grading .Its input matter is slurry and the output is dried powder.
It is an equipment with compact design ,small volume and high productivity.
Power consumption per unit of product is lower while it has high drying capacity so that it is an energy saving facility.
Excellent sealing performance ,high rate of product recovery and less environment pollution ,
thus benefiting the state as well as people.
Shorter drying duration ,good quality of product and suitable for heat-sensitive matters.
Application
    This equipment is applicable of continuously drying matters with high humidity, high consistency ,high viscosity and sensitivity in paste ,powder ,or particle state such as dye ,
pigment ,coating ,forage ,fertilizer ,fluxing agents of chemical fibre and rubber in chimecal ,light ,petrochemical ,pharmaceutical .food and mining industries.
Work Principle
    Hot air entering into air distributor (3) tangentially will go to drier (6) at high speed from the bottom of the conical section ,where it is driven by stirrer (4) to create a strong whirlwind .The matters loaded into the drier by screw-type feeder (5) will be broken into pieces by the stirrer , and then are heated and dried thoroughly by the hot air .Under the action of strong centrifugal force ,these broken pieces impact and frictionize each other to become very fine particles in fluidizing state (the high temperature zone from the feeding port to the bottom of the drier is also called as fluidizing section ).Most portion of moisture of the matters will be vapoured in the fluidizing section .The dried particles are moved to the upper part of the drier for further drying by the whirlwind.
    There is a circular apron on the top part of the drier called as grader (7) ,above which is the grading section .Those matters with big particle size or much moisture will be spun off to the wall of the drier under centrifugal force and stopped back to the drying section by the circular apron for redrying .Only those particles which are very fine and have been completely dried will be carried into cyclone separator (8)by hot air through the hole of the grader . The dried products are filled into the bags continuously through a pocket unloader. The wet hot air is discharged through bag duster (10) by means of a draught fan (11) .
Processing Flow Chart

1.Blower 2.Heater 3.Air distributor 4.Stirrer 5.Screw-type feeder 6.Drier 7.Grader 8.Cyclone separator 9.Pocket unloader 10.Bag duster 11.Draught fan

    Specifications

Model	Barrel dia of drier	Overall dimensions	Power of main equipt(KW)	Air flow(m3/h)	Vapoured volume(Kg/h)	Floor area(mm×mm)
XG-2	¢200	¢250×2800	0.75-2.2	300-800	10-150	3500×2500
XG-3	¢300	¢350×2800	1.5-3	600-1500	20-300	3800×2700
XG-4	¢400	¢450×3000	3-4	1250-2500	25-500	4000×3000
XG-5	¢500	¢550×3200	5.5	1500-4000	30-600	4200×3200
XG-6	¢600	¢650×3500	5.5-7.5	2500-5000	40-800	4250×3250
XG-8	¢800	¢850×4000	7.5	3000-8000	60-1250	4500×3500
XG-10	¢1000	¢1050×4500	7.5-11	5000-12500	100-2000	4750×3750
XG-12	¢1200	¢1250×5000	11-15	10000-20000	150-3000	5000×4000
XG-14	¢1400	¢1450×5500	15-18.5	14000-27000	200-4000	5250×4250
XG-16	¢1600	¢1650×6000	22	18700-36000	250-5000	5500×4500

Note:Data in the Table is only used for the products with normal temperature requirement .However ,that for the heat sensitive products or the products with special requirement shall be varied.