Fully automatic hard capsule liquid production and filling machine line
The main characteristics are as follows :
1 . The transmission cam of all the stations is improved , the original outer cam is pulled by the spring and changed to high quality special material , the inner groove wheel transmission is made , the fatigue of the spring is eliminated , the service life is short , and the wear and operation are stable .
2. considering the equipment running for a long time, the powder dust easily enters the mold plate cleaning table elements, innovative design of the sealing ring outer dust separation device. Fully guarantee the equipment operation and maintenance of equipment sealing cumbersome ills.
3. Added jog control system to facilitate humanized operation in production and cleaning.
Maximum output per minute 260 grains. Product standardization, serialization production: the general interchangeability of manufacturing parts reached more than 99%, each part has a fixed code, change die parts positioning hole positioning. High precision of repeated positioning; Quick mold change, easy operation and convenient cleaning.
Equipment specifications and technical parameters
| Equipment model, specification |
NJP-260 Full - automatic Hard Capsule Liquid Filling Machine |
| Technical specifications |
weight |
900kg |
| dimension |
1020×860×1970mm |
| motor power |
5.75kw |
| source |
3 phase and 4 wires
AC 380V;50Hz |
| Maximum production capacity |
260 pieces/minute |
| capsule model |
00#~5# and safety capsule A~E |
| capsule filling rate |
≥99.5% |
| noise |
≤75dBA |
filling precision
|
Liquid 300mg more ≤±3% |
| compressed air |
0.06m3/min 0.3Mpa |
| water supply requirement |
Waster ring vacuum pump with water tank for circulating the water using,can connect to outer water supply |
| vacuum degree |
-0.02~-0.06 MPa |
| water capacity |
250L/h |
| inner diameter of inlet water pipe |
20mm |
| Inner diameter of drain water |
27mm |
| Working environment temperature |
21ºC±3ºC |
| Factory height requirement |
Manual loading ≥2.6m, |
| Relative humidity of working environment |
40~55% |
| exhaust air capacity |
300m3/h |
| control system |
Variable frequency stepless speed regulation, PLC control |
| material of construction |
Material contact part with capsule and liquid use 304 and 316L stainless steel |
){kind=link}
){kind=link}