Yzg Round Shape Vacuum Dryer
|FOB Price:||US $5,000-50,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $5,000-50,000/ Piece|
|Transport Package:||Wooden Case|
- Model NO.: YZG
- Heating Mode: Steam, Hot Water, Electricity
- Brand Name: Unimach
- Structure: Oven
- Trademark: UNIMACH
- Origin: China
- Movement Way: Fixed
- Operational Method: Intermittent
- Model: Yzg
- Operation Pressure: Vacuum Dryer
- Specification: YZG
It is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.
It is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.
Note: If use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved.
Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
The heat source for evaporation may be low pressure steam or surplus heat steam.
The heat loss is less.
Before drying, the treatment of disinfection may be carried out. During the period of drying,
There is no impurity material mixed. It is in conformity with the requirement of GMP.
It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
|inter size of drying chamber (mm)||φ600×976||φ800×1247||φ1000×1527||φ1400×2054|
|outer size of drying chamber (mm)||1135×810×|
|layers of drying support||4||4||6||8|
|size of drying tray (mm)||310×600×45||520×410×45||520×410×45||460×640×45|
|quantity of drying tray||4||4||12||32|
|working pressure inside the pipe |
of drying support (MPa)
|operation temperature of |
drying support (ºC)
|degree of vacuum inside the chamber |
when operation in idle(MPa)
|under the condition of -0.1Mpa and 110ºC, |
evaporation rate of water (kg/m2·hr)
|When condenser is used, Model, |
and power of vacuum pump (kw)
|2X-15A 2KW||2X-30A 3KW||2X-30A 3KW||2X-70A 5.5KW|
|SZ-0.5 1.5KW||SZ-1 2.2KW||SZ-1 2.2KW||SZ-2 4KW|
|Weight of drying chamber (kg)||250||600||800||1400|