YPG Pressure Spray Dryer (Nozzle Spray)
Specifications
1. GMP
2. Dry liquid to powder
3. Drying time is short
4. Easy to operate
Description of YPG Pressure Spray Dryer
This set is an apparatus that can finish drying and granulating at the same time. The needed ball granule with certain size and ratio can be got in accordance with requirements of process to adjust pressure, flow, and size of atomizing hole.
The working of this set is as follows: The liquid of raw material is pumped in through diaphragm pump. The liquid of raw material be atomized into tiny droplets. Then it gathers with hot air and falls off. Most parts of powder material will be collected through the outlet of discharged at the bottom. The wasted air and fine powder will be collected through collector at the bottom of cyclone. At the outlet it can also be equipped with two grades of duster. Its ratio of recovery will be 99%.
Features of YPG Pressure Spray Dryer
1. The drying speed is fast. The surface area of liquid raw material after being atomized will be increased greatly. 95-98% of moisture can be evaporated at a moment. The time of drying needs about ten seconds to several tens of seconds. It is suitable for drying heat sensitive material particularly.
2. The finished product is ball granule with uniform size. Its fluidity and solubility are good. The purity of product is high and its quality is good.
3. The scope of application is wide. According to the characteristics of raw material, it can use hot air to dry and can also use cool air to granulate. It has strong adaptability to raw materials.
4. Small atomizing power
5. Its operation is simple and stable and convenient and is easy to realize automatic operation.
Scope of application of YPG Pressure Spray Dryer
1. Chemical industry: Organic catalyst, resin, synthetic washing powder, oils, thiamin, dyestuff, intermediate of dyestuff, white carbon black, graphite, ammonium phosphate and so on.
2. Foodstuff: Amino acid and similar substance, flavoring, protein, starch, dairy products, extractive substance from coffee, fish powder, extractive substance from meat and so on.
3. Pharmaceutical: Chinese patent medicines, agrochemicals, antibiotics, medical drinking agent and so on.
4. Ceramics: Magnesium oxide, kaoline, all kinds of metallic oxide, dolomite and so on.
5. Granulating through atomizing: All kings of fertilizer, aluminum oxide, ceramics powder, pharmaceutical, heavy metallic super hardness steel, chemical fertilizer, washing powder, Chinese patent medicines and so on.
| Model |
50 |
100 |
150 |
200 |
300 |
500 |
1000 |
| Water evaporation capacity Kg/h |
50 |
100 |
150 |
200 |
300 |
500 |
1000 |
| Overall dimension(Φ*H) mm |
1600×8900 |
2000×11500 |
2400×13500 |
2800×14800 |
3200×15400 |
3800×18800 |
4600×22500 |
| High-pressure pump pressure MPa |
2-10 |
| Power Kw |
8.5 |
14 |
22 |
24 |
30 |
82 |
30 |
Inlet air temperature
ºC |
300-350 |
| product water contents % |
less than 5 percent, and 5 percent can be achieved. |
| collection rate % |
>97 |
| electric heater Kw |
75 |
120 |
150 |
When the temperature is lower then 200, the parameters should be calculated according to the practical condition. |
| electricity + steam Mpa+Kw |
0.5+54 |
0.6+90 |
0.6+108 |
| hot air furnace Kcal/h |
100000 |
150000 |
200000 |
300000 |
400000 |
500000 |
1200000 |
){kind=link}
){kind=link}